Masked Diffuser

This is a masked diffuser for the Dragonburner based on the one in the original Dragonburner repo.

This diffuser is modified to have a mask behind the Micron logo, to reduce light leakage. In order to print it you will need:

A clear filament and black filament of ABS or PETG. Both clear and black filaments need to be the same material, since otherwise they will not stick to each other. (I have not tested with different types but maybe they will work for you).

Simply need to go to your slicer and insert a pause at the first layer above the logo hole. Start the print with the black filament, and then at the pause, change to clear filament, and remember to purge out all the black before you resume.

STL is here: https://github.com/astrobunny/voron-mods/blob/master/micron/STL/masked-diffuser-dragonburner.stl

I recommend printing with a 0.1 layer height and 0.2 for the first layer, and with all other voron part settings. But go ahead and do whatever you are comfortable with.